top of page
Asset 1.png
Asset 3.png
clip.PNG

UNIVERSAL BRIDGING CLIP UBC 365, UBC 600, UBC 800

The Bailey Universal Bridging clip is a unique patented design engineered for rapid, economic installation with Bailey bridging channel in both curtain and loadbearing steel stud designs. Installs rapidly with #8 or #10 screws in prepunched holes.

Asset 4.png

ALUMINUM BURN CLIP (AB)

Aluminum Burn Clips are used as part of the H-Stud Area Separation Wall assembly and are designed to melt and break away when exposed to fire. The clips are used to hold the area separation wall assembly in place at the floor, roof and truss line between adjacent units.

Asset 5.png

H-STUD PROFILE

H-Studs are 2" wide vertical members used to secure two 1" thick pieces of gypsum shaft liner in Area Separation Wall assemblies. H-Studs are inserted into C-Runners and slid over gypsum panel liner edges.

Asset 6.png

C-RUNNER PROFILE

C-Runner, also referred to as H-Track, is used to secure H-Stud and gypsum shaft liner panels in area separation wall assemblies. C-Runner is attached to the foundation with power-driven fasteners.

Asset 7.png

TOP DELFECTIONCLIP TDC 350, AND TDC 587

Used on exterior curtain wall studs to allow for building structure deflection at the top of the wall. Bailey Top Deflection Clips can also be used for non-load bearing interior wall requirements.

Asset 8.png

HORIZONTAL FLANGE ATTACHMENT HFA CLIP

The Bailey HFA Clip is a low cost method to accommodate the vertical deflection in exterior by-pass curtain wall conditions.

bottom of page