CGC SHEETROCK® BRAND PAPER JOINT TAPE
High-performing paper tape that has strong, cross-directional fibres with high tensile strength.
FIBAFUSE® PAPERLESS DRYWALL TAPE
Designed for professional renovators and remodelers, FibaFuse is a mold-resistant glass mat drywall tape that is ideal for high-humidity and moisture-prone applications.
CGC SHEETROCK® BRAND MOULD-RESISTANT FIBERGLASS DRYWALL TAPE
Designed to provide increased moisture and mould protection and is self-adhesive which makes joint finishing simpler and quicker.
STRAIT-FLEX® MID-FLEX 300 PAPER-FACED COMPOSITE DRYWALL TAPE
Strait-Flex® Mid-Flex 300 Paper-Faced Composite Drywall Tape is ideal for inside, outside and angled corners.
CGC FIBERGLASS DRYWALL TAPE
CGC Fiberglass Drywall Tape is made with a unique cross fiberglass construction to provide greater drywall joint strength than conventional fiberglass leno weave mesh tapes. CGC Fiberglass Drywall Tape resists shrinking, tearing, stretching and distortion.
FLAME FIGHTER FIRE TAPE®
Flame Fighter Fire Tape® is an alternative to conventional paper and fiberglass tape used as a finishing component for gypsum board assemblies approved and Listed to ASTM E119, Standard Test Methods for Fire Tests of Building Construction and Materials or CAN/ULC S101, Standard Methods of Fire Endurance Tests of Building Construction and Materials for use in the United States and Canada. These test standards meet the standards of NFPA 251, UL 263, ISO 834, BS 476, etc.
EZ TAPE PEEL AND STICK®
PEEL AND STICK Tape is quicker to install
-
The tape is removed from the top side of the tape rather than from the bottom making for quicker installation and disposal of the liner.
-
Tape is creased down the center to make it easy to fold and install in corners.
EZ TAPE QUICK STICK®
SAVES installation time
QUICK STICK requires one less coat of joint compound compared to the traditional method.
CREASED for ease of corner application
The crease down the center of the tape makes it easy to fold and install in corners.
LEVELLINE® Flexible Corner Trim
Levelline Flex is a corner bead that features a polymer core with a built-in flexible hinge that flexes to any inside or outside corner angle.
CertainTeed NO-COAT® Flexible Corner
Levelline Flex is a corner bead that features a polymer core with a built-in flexible hinge that flexes to any inside or outside corner angle.
CertainTeed NO-COAT® Flexible Corner
Levelline Flex is a corner bead that features a polymer core with a built-in flexible hinge that flexes to any inside or outside corner angle.
SHEATHING TAPE VAPOR BARRIER 60MMX55M
This tape is made of a UV resistant polypropylene film and coated with a specially formulated solvent-based acrylic adhesive. This tape has been specifically designed to seal, seam PE Vapor Barrier. The 219-08 is the only CCMC evaluated method to seal, seam polyethylene vapor barrier film.
CONTRACTORS’ SHEATHING TAPE
This tape is made of a UV resistant polypropylene film and coated with high shear, high tack solvent based acrylic adhesive.
CANTECH BLUE PAINTERS TAPE
Blue fine crepe paper masking tape with a specially formulated pressure sensitive, synthetic rubber adhesive designed for exposure to sunlight for up to fourteen days. Smooth backing for superior paint lines.
CANTECH GREEN PAINTERS TAPE
Green fine crepe paper masking tape with a specially formulated pressure sensitive, synthetic rubber adhesive designed for exposure to sunlight for up to ten days.
FrogTape® Multi-Surface Painter's Tape - Green, 0.94 in. x 60 yd
It’s made with exclusive PaintBlock® Technology, a super-absorbent polymer that reacts with the water in latex paint and instantly gels to form a micro-barrier that seals the edges of the tape to prevent paint bleed.
CANTECH GENERAL PURPOSE MASKING TAPE
Beige crepe paper masking tape coated with an aggressive pressure sensitive natural rubber adhesive. Designed primarily as an all-purpose product for non-critical applications.
CANTECH ELECTRICAL TAPE 7 MIL 18mm X 20m
Heavy gauge vinyl plastic tape developed for rugged application without film fracture. Will securely insulate splices exposed to sub-zero temperatures. CSA and UL approved, with a temperature range of -18°C to 90°C
