top of page

GYPSUM PANELS

shaftwall.PNG
fireassemblies.PNG
The Lightest 12.7mm (1/2") Gypsum Panel 

CGC Sheetrock® Brand UltraLight Panels are re-engineered, lightweight gypsum panels with a patented, composite design. The noncombustible core is encased in 100% recycled face and back papers. The natural finish face paper is folded around the long edges to reinforce and protect the core and the ends are cut square and even. The long edges of the panels are tapered, allowing joints to be reinforced and concealed with CGC/Synko® Brand Interior Finishing Products.                                                                                        

CGC SHEETROCK  BRAND PANELS FIRECODE  X  (15.9mm) (5/8")

CGC Sheetrock® Brand Firecode® X panels are composed of fire-resistant gypsum core encased in 100% recycled natural finish face paper and 100% recycled liner paper on the back.  These panels score and snap easily for quick installation of interior wall and ceiling applications, allowing painting, decorating and the installation of metal or wood almost immediately.

firecode c.jpg

SHEETROCK BRAND FIRECODE "C" GYPSUM PANELS

This product is developed with additives that support the integrity of the core under fire exposure, resulting in improved fire protection over standard Firecode panels. Sheetrock Brand Firecode "C" Gypsum Panels are UL-Listed (Type C) for application in fire-rated construction and comply with Type X requirements. Systems using Sheetrock® Brand Firecode "C" Gypsum Panels qualified for fire ratings of up to 4 hours in walls, 3 hours in ceilings and 4 hours for column protection.

gallery-large.876.657.jpg

USG SHEETROCK® BRAND MOLD TOUGH® AR FIRECODE® X PANELS

USG Sheetrock® Brand Mold Tough® AR Firecode® X Panels are by design stronger and have greater surface hardness than standard 5/8 in. (15.9 mm) Type X panels. Because of this, they are heavier and will be more difficult to install. Slower installation production rates should be accounted for in job planning.

gallery-large.876.657 (1).jpg

USG SHEETROCK® BRAND MOLD TOUGH® VHI FIRECODE® X PANELS

USG Sheetrock® Brand Mold Tough® VHI Firecode® X Panels are by design stronger and have greater surface hardness than standard 5/8 in. (15.9 mm) Type X panels. Because of this, they are heavier and will be more difficult to install. Slower installation production rates should be accounted for in job planning.

Sheetrock Brand UltraLight Panels Mold Tough 1/2
Sheetrock Brand UltraLight Panels Mold Tough 5/8

Formulated with a high strength-to-weight ratio composite design, the panels feature a noncombustible, moisture-resistant core encased in 100% recycled moisture- and mold-resistant green face and brown back papers.

CGC CAVITY SHAFT WALL SYSTEM ( 1")

The CGC Cavity Shaft Wall System includes components that provide the strength to withstand lateral loads and fire protection necessary for walls that enclose elevator shafts, stairwells and other vertical shafts. The system includes gypsum liner panels, gypsum panels and cement board, interior finishing products and framing components.

Sheetrock Brand AR Firecode® X Panels

Choose this economical alternative to standard Sheetrock® Brand Gypsum Panels, for high-traffic commercial and institutional construction where durability and fire resistance are required.           

Durock Brand Cement Board

Durock® Brand Cement Board is moisture and mold resistant making it the perfect choice for tile and flooring in baths, kitchens and laundry rooms. Durock® Brand Cement Board cuts easily and installs quickly with Durock™ Brand Tile Backer Screws, self-drilling fasteners or nails.                     

glass-matt.jpg
Securock Brand Glass-Mat Sheathing 1/2 
 
Securock Brand Glass-Matt Sheething 5/8
Mold-resistant glass-mat panels that provide greater abuse resistance than standard drywall.
CGC FIBEROCK® BRAND AQUA-TOUGH™ INTERIOR PANEL AR

– Aqua-Tough™ formulation provides improved moisture resistance

– No face paper to scratch or tear

– Resist denting, breaking and puncturing, even in high-traffic areas

– Provides excellent fire resistance

– Offer an economical alternative to concrete block and plaster construction

– Ideal for institutional, commercial and residential interiors

– Certified, recycled content of 95%

securock-sheathing.png
SECUROCK® BRAND ULTRALIGHT GLASS-MAT SHEATHING (REGULAR AND FIRECODE® X)

Securock  Brand Glass-Mat Sheathing is a noncombustible, moisture- and mold-resistant panel that offers an improved coated fiberglass facer mat to maximize coverage of air/water barrier systems. Designed for use under exterior claddings where conventional gypsum sheathing products have traditionally been used, these panels are warranted for up to 12 months after application. 

Securock® ExoAir® 430 Panel

The Securock® ExoAir® 430 System is comprised of an air/water barrier membrane factory-integrated with a gypsum sheathing panel. The panel is a glass mat-faced, moisture- and mold-resistant gypsum panel, with a non-combustible core integrated with a factory-applied synthetic vapor permeable air/water barrier membrane. The outcome is a uniform membrane with superior bond resulting in predictable air and water barrier performance and adhesion to the base panel. The panel is a component of the Securock® ExoAir® 430 Air Barrier System, to be installed using Tremco sealants and transition membranes to achieve air barrier continuity. 

CGC SHEETROCK® BRAND GYPSUM PANELS FLEXIBLE 6.4 mm (1/4")

Flexible Gypsum board for Curved walls, Archways and Staircases.

– Designed to construct curved surfaces easily

– Quick installation and decoration

– Lightweight, fire-resistant dry construction

bottom of page